CCIE Enterprise Infrastructure Exam Details

In this day and age when the landscape of networking technologies is changing at a higher pace, the gap between software and infrastructure is getting bridged day by day. This is the new collaboration with intent-based networking that offers the organization scalable automation and networking infrastructure security.

Cisco CCIE Enterprise Infrastructure Certification lets networking engineers have opportunities to increase this potential without end. Enhancing the complicated enterprise infrastructure solution skills, CCIE Enterprise Infrastructure Certification has been designed to prepare candidates (networking professionals) to be technical leaders.

The Cisco certification course validates candidates’ skills in core networking technology and the end-to-end lifecycle of complex enterprise networks, ranging from planning and designing to operating and optimizing. Further, this recently launched program will replace the most demanded Cisco CCIE Routing & Switching Certification.

CCIE Enterprise Infrastructure Certification Exams

By passing the CCIE Enterprise Infrastructure Exams and earning the certification, you can be able to the expert-level job roles in enterprise infrastructure technologies by bringing confidence and capabilities on board.

To clear this exam, networking aspirants need to pass the two Cisco Certifications to earn the CCIE Enterprise Infrastructure certification.

1. The Qualifying Examination

This examination is focused on the implementation and operation of the Cisco Enterprise Network Core Technologies for CCIE Enterprise Infrastructure certification i.e. Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR 300-401).

The certification program includes Implementing Core Enterprise Network Technologies on Dual Stack (IPv4 AND IPv6) Architecture, Virtualization, Network Assurance, Infrastructure, Security, and Automation in its training program and earns you a specialist certification in recognition of your skills and knowledge.

2. The CCIE Lab Exam

After passing the ENCOR exam, candidates must complete the CCIE Enterprise Infrastructure Lab Exam. This hands-on exam tests your ability to configure and troubleshoot complex network scenarios in a simulated environment. It typically lasts 8 hours and includes various tasks that assess your practical skills in implementing enterprise networking solutions.

This is an 8-hour long exam focused on honing your skills in the end-to-end life cycle of complex enterprise networks that include the following:

● Planning

● Designing

● Deploying

● Operating

● Optimizing

This exam is divided into two modules: Testing Automation and Network Programmability.

By passing both the qualifying examination and the lab exam, you will achieve the prestigious CCIE Enterprise Infrastructure certification, demonstrating your expertise in designing and managing advanced enterprise networks.

Online CCIE Certification TrainingJoin the live training class with virtual lab access.Explore course

CCIE Exam Details

Here are the CCIE Exam details for both the exams, i.e. Qualifying examination and Lab examination.

● Exam Name: Implementing Cisco Enterprise Network Core Technologies

● Exam Code: 300 – 401 ENCORE

● Exam Duration: 120 minutes

Key details of the lab exam

● Exam Name: CCIE Enterprise Infrastructure v1.0

The exam contains 2 modules:

1. Module 1 – Design (3 hours)

2. Module 2 – Deploy, Operate and Optimize (5 hours)

● Exam Duration: 8 Hours

Important Concepts for CCIE Examination

To prepare for the CCIE certification, one should master the following concepts:

1. Network Infrastructure

● Switched Campus: Understand switch administration, Layer 2 protocols like CDP/LLDP/UDLD, VLAN technologies, EtherChannel, and Spanning Tree Protocol

● Routing Concepts: Learn about administrative distance, VRF-lite, static routing, and policy-based routing

● EIGRP and OSPF: Implement and troubleshoot EIGRP and OSPF routing protocols

● BGP: Configure and optimize BGP for enterprise networks

2. Software-Defined Infrastructure

● Cisco SD-Access: Understand fabric architecture, device onboarding, host onboarding, segmentation using VNs and SGTs, and assurance

● Cisco SD-WAN: Design SD-WAN solutions, configure WAN edge devices, use configuration templates, and implement localized and centralized policies

3. Transport Technologies

● MPLS: Learn about MPLS operations, LDP, and Layer 3 VPNs

● DMVPN: Implement and troubleshoot DMVPN Phase 3 with dual-hub

4. Infrastructure Security and Services

● Security: Configure access control lists (ACLs), AAA authentication, and secure network management

● Network Services: Implement DHCP, NAT, and IP SLA

5. Infrastructure Automation and Programmability

● Automation: Utilize REST APIs, Python scripting, and Ansible for network automation

● Programmability: Understand YANG data models, NETCONF, and RESTCONF

Mastering these concepts, along with hands-on practice in the lab, will greatly improve your chances of success in the CCIE Enterprise Infrastructure exam.

If you seek to achieve the certification and live CCNP training online then feel free to contact our learning advisors. 

Contact learner advisor

Benefits of CCIE Certification

There are a whole lot of benefits to having this certification. Here are the key benefits:

● With this certification in hand, you will be recognized as a technical leader of the enterprise networking

● This certification validates your skills in deploying, operating, and optimizing complex enterprise networks.

● It distinguishes you as the best.

● It lets your organization have digital transportation with technical expertise and designing skills.

● This certification can provide you with training on networking automation and programmability.

CCIE Re-certification

In general, the CCIE Enterprise Infrastructure Certification can be valid for three years.

Cisco Certification has been crafted to keep networking aspirants updated with the latest technology and keep proving their skills meticulously. From February 24, 2020, Cisco's Re-certification Policy is going to offer students manifold ways to keep their certification valid with diversified skill sets.

CCIE Enterprise Certification - Summing Up!

The CCIE Certification is a prestigious credential for networking professionals, requiring candidates to pass a written qualifying exam and an eight-hour hands-on lab exam. The certification covers various tracks, including Enterprise Infrastructure, Security, and Data Center.

Candidates typically invest significant time and resources in preparation, with the lab exam focusing on real-world scenarios. Achieving CCIE status demonstrates advanced expertise in network design, implementation, and troubleshooting, greatly enhancing career prospects and earning potential in the competitive networking field.

You can also check out our IT infrastructure courses to prepare for other CCIE certifications.