.png)
Topology
Tasks
1. Configure a Device Template with the following parameters for HQ vEdge cloud devices
● Template Name: HQ-VE-TEMP
● Description: HQ-VE-TEMP-Description
● Basic Information
✓ System->VE-System
● Transport & Management
✓ VPN 0: HQ-VE-VPN-VPN0
✓ VPN Interface: HQ-VE-VPNINT-VPN0-G0
✓ BGP: HQ-VE-BGP-VPN0
✓ VPN 1: HQ-VE-VPN-VPN1
✓ VPN Interface: HQ-VE-VPNINT-VPN1-G1
✓ OSPF: HQ-VE-OSPF-VPN1
✓ VPN512: HQ-VE-VPN-VPN512
✓ VPN512 Interface: HQ-VE-VPINT-VPN512-Eth0
2. Attach HQ vEdge1 cloud device to the Device Template “HQ-VE-TEMP” with the following variable parameters
● Interface IP for Ge0/1:10.1.2.1/24
● Default Gateway for VPN0: 10.1.1.2
● Interface IP for Ge0/0:10.1.1.1/24
● Hostname: vEdge1
● System IP: 10.1.1.21
● Site ID: 1
Configuration and Verification
Configure a Device Template with the following parameters for HQ vEdge cloud devicesThis is the path to create the Template Setting>Configuration >Templates >Device >Create Template
Click on Create Template then select “From Feature Template”
Fill the parameters as given- Template Name: HQ-VE-TEMP Description: HQ-VE-TEMP-Description
Fill the Basic Configuration as given System->VE-System
Now select Transport & Management VPN and fill the details as given
Fill the VPN512 details on right click on VPN Interface
Now select Service VPN and fill the details as given in task then click on update to continue
Here we are able to see our HQ-VE-VPN-VPN0 device Template is created
Now click on three dots
Select “Attach Devices”
Select vEdge1 from right panel and click on arrow and then click on Attach
Here vEdge1 attached as shown
Now click on three dots then select “Edit Device Template”
Fill the details as given and click on Update to continue
g15
Here we are able to see vEdge1 attached
Now click on device template configuration and verify the configuration VPN0 and Interface ge0/0
verify the configuration VPN1 and VPN512 then click on Configure Devices.
The configuration automatically push on vEdge1
To verify the configuration go to Site-1 and enter command “show ip route”
We are able to ping our site-1 loop ip address
Now on vEdge1 we are able to see ospf neighbour.
