Task
● Configure Data Center as HUB location and all remote sites as Spokes.
Configuration
Steps:
1. Create Site-list HUB-DC1 100,200
2. Create Site list Spokes 1-99
3. Create VPN List VPN10 10
4. Configure HUB-AND-SPOKE-TOPOLOGY
5. Activate Policy.
Activate Policy: -
Verification:
Before Activating Policy: -
After Activating Policy: -
Class Sessions
1- Lab 1.1: Setup vManage
2- Lab 1.2: Setup vBond
3- Lab 1.3: Setup vSmart
4- Lab 2.1: SD-WAN vEdge Cloud Installation
5- Lab 2.2: Install vEdge Cloud
6- Lab 3.1: SD-WAN Viptela Templates
7- Lab 3.2: SD-WAN Viptela Templates
8- Lab 3.3: Create Service Side VPN
9- Lab 3.4: Common CLI Template
10- Lab 4.1: Configure Feature Template for enable OSPF
11- Lab 4.2: Configure Feature Template to enable BGP
12- Lab 5.1: Create Groups
13- Lab 5.2: Create Users
14- Lab 6.1: Download Software upgrade image from cisco.com
15- Lab 6.2: Store software image on vManage
16- Lab 6.3: Upgrade software version on vManage
17- Lab 6.4: vBond & vSmart upgradation
18- Lab 6.5: Upgrade vEdge
19- Lab 7.1: Traffic engineering on data center vEdges
20- Lab 8.1: Implement traffic engineering on Data Center
21- Lab 9.1: Configure Zscaler Router
22- Lab 10.1: Policy influences data flow traffic
23- Lab 11.1: Configure Data Center as HUB location
24- Lab 12.1: SDWAN Policy Implementation
25- Lab 13.1: Configure GRE tunnels
26- Lab 13.2: Create policy
27- Lab 13.3: Implement Service Firewall in Service VPN
28- Lab Topology and IP Address